There are many aspects in the installation of toilet partitions. Fixed wall panels, fixed adjustment seats and partition boards are all points that need special attention. In addition, more attention should be paid to when decorating. Let's talk about the relevant contents below.
Toilet partition installation
Before installing the toilet partition wall, understand the size of the partition wall to be installed, then set out, and then fix the frame to prevent the instability of the partition wall during the installation process. When everything is finished, you can install the door leaf.
Draw the center line of the fixing piece on the wall, see that there are several screw holes on the fixing piece for fixing, and punch a corresponding number of holes along the center line on the wall, embed the plastic plug sleeve in the holes in advance, and fix the fixing piece on the wall with expansion screws.
According to the pre-designed installation drawings, find out the location of the base of the toilet floor and draw the center line, and then fix the base at about 20 cm away from the edge of the partition board.
The installation position and height of the compartment are determined by the wall fixing plate and the adjusting base, so the first two steps should pave the way for the installation of the compartment. Fix the clapboard and adjust the foot base in the wall, and raise the clapboard to about 15 cm from the ground. Then, use a level ruler to measure whether it is horizontal or not. After the level is determined, use screws to fix the diaphragm on the fixing piece of the wall and the adjusting foot base.
Toilet partition decoration
When purchasing partition materials, be sure to see whether they are marked with product certificate, etc. Partition materials with product certificates are of guaranteed quality, so they are safe to use. We must not buy fake and low-quality partition materials for the sake of small price. We must not be careless in choosing partition materials for the sake of small price and trouble in the future. Toilet partition materials must have waterproof and moisture-proof functions. At the same time, we should choose reliable toilet partition manufacturers
In the process of toilet partition decoration, the size of the interval needs to be determined according to different toilet space size, installation style and different users. If the previous measurement is not standard enough, it will directly affect the use effect of the partition. Therefore, before the toilet partition manufacturer decorates, the installation size of the partition should be carefully planned and measured.
Floor drains must be installed in the wet areas of Jinan toilet partitions. The great function of partition is to divide the dry and wet areas in the bathroom, so that the two areas do not disturb each other and do their jobs. If the toilet partition is set, the running water on the toilet floor and the water vapor in the space will be isolated in the wet area. Therefore, we need to set a floor drain in the wet area of the isolation area to discharge the running water in time. When installing the ground floor, a certain slope is required to facilitate the flow of water to the floor drain.
The above is all about the problems and precautions introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.jnndjc.com , our staff will contact you in time.